TAPING FOOT # A1A333000
This special sewing foot is for sewing on tapes. On stretch materials ( knitwear ) the seams are prevented from stretching when a tape is sewn on.
Preparing the machine
Differential
feed setting:set at "N" position.
Needles:use 1 or 2 needles, depending on tape width
Stitch length:N
Thread tension:standard setting
Inserting the tape:
  1. Set needle at highest position.
  2. Disengage upper knife.
  3. Raise sewing foot and place tape in guides -1- from right.
  4. Push tape to rightstop with slide -2-
  5. Adjust location of tape in relation to needle by turning adjusting screw -3-
  6. Place fabric in and carry out a sewing test.
  7. Re-engage upper knife after finishing the sewing on tapes.